UDS Charcoal Basket Question - Printable Version
+- Utah BBQ Forums (http://www.utahbbq.org)
+-- Forum: BBQ (/forumdisplay.php?fid=5)
+--- Forum: Tips, Tricks, and Helpful Hints (/forumdisplay.php?fid=16)
+--- Thread: UDS Charcoal Basket Question (/showthread.php?tid=4955)
UDS Charcoal Basket Question - RichOlsen - 04-17-2013 08:40 AM
I bought a UDS over the weekend (after seeing many of you at the Sams Club event making amazing BBQ on a UDS)
and the charcoal basket is different than what I have seen before. Instead of a basket that fills most of the bottom of the cooker, its taller and more of a cylinder in shape, made of same expanded metal.
Question is, will this cook evenly if it sits in the center of the drum instead of spread out more like a typical UDS basket?
Am I over thinking this?
RE: UDS Charcoal Basket Question - PackerBacker - 04-17-2013 08:44 AM
(04-17-2013 08:40 AM)RichOlsen Wrote: Hey all,
Most baskets are about 4" smaller in diameter than the drum its self
UDS Charcoal Basket Question - Curtis Nations - 04-17-2013 09:22 AM
It shouldn't make that much of a difference, how tall is the basket and how wide?
RE: UDS Charcoal Basket Question - Big Johnson's BBQ - 04-17-2013 09:47 AM
The basket in both of mine are made from the bottom grate of a Weber Kettle - about 18 1/2 inches. Mine are 12 inches tall & made from expanded metal for longer cooks...
RE: UDS Charcoal Basket Question - SoEzzy - 04-17-2013 10:39 AM
Kettle charcoal grates are about 17.5" and to wrap them in #9 x 3/4" expanded metal, you will need 55" to tough edge to edge or 60" for an overlap.
RE: UDS Charcoal Basket Question - T - 04-17-2013 03:54 PM
Hey Rich, I have seen all kinds over years, and they all seem to work well for who ever is cooking on them. Like you said don't over think it. Don't know if you bought it used or whatever but it worked for whomever made it. UDS, BDS, whatever pit your cooking on this statement will never change "know your pit" Have fun man!
RE: UDS Charcoal Basket Question - RichOlsen - 04-19-2013 11:37 AM
Just FYI...... here are pics of the coal basket.......its pretty tall
RE: UDS Charcoal Basket Question - SoEzzy - 04-19-2013 12:40 PM
I wouldn't fill it past about the halfway mark...part of what makes a UDS work so well is the distance that can be maintained between the fire and the food.
From the UDS's that have been made in the last 5 or 6 years, and have been well documented on the web, most have at least 18" from the possible top of the fire to the bottom of their grate.
RE: UDS Charcoal Basket Question - Pigout - 04-19-2013 03:32 PM
Do you use a heat defector or water pan above the basket?
RE: UDS Charcoal Basket Question - SoEzzy - 04-19-2013 03:54 PM
Nope, some folks use a diffuser plate, some use a water pan.
Even in the 55 gallon UDS's that I made, there was a long enough space between the fire and the grate.
The main thing is to catch the temperatures on the way up, and make sure the lid is tight on the drum.
When running at your happy spot for that pit, on that one hole or one valve, when you are getting ready to check on the meat, spritz or mop where you need to take the lid off... learn to close the vent / valve and allow it to burn through the O2 for 2 or 3 minutes, pop off the lid then do what you need to do as quickly as possible, then relid... (this is where a number of folks make a mistake), wait a full 10 minutes before you reset the vent/ valve back to where the cooker was running.
Those that make the mistake of opening their vents as soon as they close the lid, have just supercharged the cooker with extra Oxygen, and it will jump 40 - 50°, and once it has gotten away from you, for more than 10 minutes, you've lost the control on that pit.
RE: UDS Charcoal Basket Question - PackerBacker - 04-19-2013 04:57 PM
I see that as a pretty good way do utilize the "Minion" method...
RE: UDS Charcoal Basket Question - Phred - 04-22-2013 03:08 PM
Here's another version of a drum smoker
RE: UDS Charcoal Basket Question - RichOlsen - 04-22-2013 03:58 PM
[attachment=1224][attachment=1224]Hey all.....I did my first smoke on the UDS on Saturday, Ill post the results in a new thread, however, I took 15 minutes and built a new fire basket for the UDS.
went to the dollar store and bought 3 packs of warming racks (2 per pack)
$3 dollars spent, and a bit of connecting wire and TADA!
Its not the end all/be all but it worked great.
See the pics...
RE: UDS Charcoal Basket Question - Dutchovendude - 04-22-2013 04:56 PM
RE: UDS Charcoal Basket Question - LT72884 - 05-21-2013 03:29 PM
Yeah thats an odd size drum basket for sure. Yeah it could work but you still what your radius of the basket to be a we bit more spread out. Like a charcoal grate from a weber is perfect cuz now the heat given off from the basket is a nice spread out even heat. Im willing to beat you could find a grate and then cut the expanded metal and fit it around the grate. Or make a square basket out of it
RE: UDS Charcoal Basket Question - Dale - 09-15-2013 02:10 PM
After years of having trouble controlling temp in my UDS I just started closing the valve before I open the pit, but I have not been waiting 10 min to open them. Great tip thanks!
RE: UDS Charcoal Basket Question - SoEzzy - 09-15-2013 03:54 PM
If you are closing it before you take the lid off for a minute, (or less), close the valve about 3 or 4 minutes before you do.
Once you relid you have lots of Oxygen still inside, you can double the time plus a little, (that's why I say 10 minutes or so), and then reset the valve to where you had it before you took the lid off, and you won't get a large temperature spike. You may get a 10 - 15° jump, but normally it will bounce rather than spike.
RE: UDS Charcoal Basket Question - Dale - 09-15-2013 06:47 PM
(09-15-2013 03:54 PM)SoEzzy Wrote: If you are closing it before you take the lid off for a minute, (or less), close the valve about 3 or 4 minutes before you do.
RE: UDS Charcoal Basket Question - Dale - 09-15-2013 06:51 PM
(09-15-2013 06:47 PM)Dale Wrote:(09-15-2013 03:54 PM)SoEzzy Wrote: If you are closing it before you take the lid off for a minute, (or less), close the valve about 3 or 4 minutes before you do.
Tried this with some salmon today and the temperature stayed constant thanks for the advice. Bad news is the salmon did not turn out so great, hope for better results next time.